Linux系统下对硬盘分区进行扩容的方法总结

[root@iZ94zz3wqciZ ~]# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/xvda1 20641404 14778400 4814480 76% / tmpfs 509300 0 509300 0% /dev/shm [root@iZ94zz3wqciZ ~]# fdisk -l Disk /dev/xvda: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00078f9c Device Boot Start End Blocks Id System /dev/xvda1 * 1 2611 20970496 83 Linux //id是83，非lvm Disk /dev/xvdb: 23.6 GB, 23622320128 bytes //新买的硬盘 255 heads, 56 sectors/track, 3230 cylinders Units = cylinders of 14280 * 512 = 7311360 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x27cc1f5a

[root@iZ94zz3wqciZ ~]# fdisk -S 56 /dev/xvdb //分区 WARNING: DOS-compatible mode is deprecated. It\’s strongly recommended to switch off the mode (command \’c\’) and change display units to sectors (command \’u\’). Command (m for help): n //输入n Command action e extended p primary partition (1-4) p //主分区 Partition number (1-4): 1 //分区号1 First cylinder (1-3230, default 1): Using default value 1 Last cylinder, +cylinders or +size{K,M,G} (1-3230, default 3230): Using default value 3230 Command (m for help): wq //保存并退出 The partition table has been altered! [root@iZ94zz3wqciZ ~]# fdisk -l Disk /dev/xvda: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00078f9c Device Boot Start End Blocks Id System /dev/xvda1 * 1 2611 20970496 83 Linux Disk /dev/xvdb: 23.6 GB, 23622320128 bytes 255 heads, 56 sectors/track, 3230 cylinders Units = cylinders of 14280 * 512 = 7311360 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x27cc1f5a Device Boot Start End Blocks Id System /dev/xvdb1 1 3230 23062172 83 Linux //分区后

[root@iZ94zz3wqciZ ~]# mkfs.ext4 /dev/xvdb1 //格式化分区 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 1441792 inodes, 5765543 blocks 288277 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 176 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 35 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.

[root@iZ94zz3wqciZ ~]# mkdir /mnt/fastdfs //挂载目录 [root@iZ94zz3wqciZ ~]# echo \”/dev/xvdb1 /mnt/fastdfs ext4 defaults 0 0\” >> /etc/fstab //重启会自动挂载 [root@iZ94zz3wqciZ ~]# mount -a //挂载所有目录 [root@iZ94zz3wqciZ ~]# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/xvda1 20641404 14778404 4814476 76% / tmpfs 509300 0 509300 0% /dev/shm /dev/xvdb1 22694396 176064 21365516 1% /mnt/fastdfs //新的分区已挂载

[root@iZ94zz3wqciZ ~]# umount -a //取消挂载 [root@iZ94zz3wqciZ ~]# fdisk /dev/xvdb //分区 WARNING: DOS-compatible mode is deprecated. It\’s strongly recommended to switch off the mode (command \’c\’) and change display units to sectors (command \’u\’). Command (m for help): d //删除分区 Selected partition 1 Command (m for help): wq //保存 The partition table has been altered!

[root@iZ94zz3wqciZ nginx]# uname -a //查看内核信息 Linux iZ94zz3wqciZ 2.6.32-431.23.3.el6.x86_64 #1 SMP Thu Jul 31 17:20:51 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux [root@iZ94zz3wqciZ ~]# yum install lvm2 device-mapper //安装 LVM2，2.6.9以后版本不用装device-mapper [root@iZ94zz3wqciZ nginx]# lsmod | grep dm_mod //是否加载了dm_mod dm_mod 84337 5 dm_mirror,dm_log

[root@iZ94zz3wqciZ ~]# fdisk /dev/xvdb //分区 WARNING: DOS-compatible mode is deprecated. It\’s strongly recommended to switch off the mode (command \’c\’) and change display units to sectors (command \’u\’). Command (m for help): l 0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris 1 FAT12 39 Plan 9 82 Linux swap / So c1 DRDOS/sec (FAT- 2 XENIX root 3c PartitionMagic 83 Linux c4 DRDOS/sec (FAT- 3 XENIX usr 40 Venix 80286 84 OS/2 hidden C: c6 DRDOS/sec (FAT- 4 FAT16 <32M 41 PPC PReP Boot 85 Linux extended c7 Syrinx 5 Extended 42 SFS 86 NTFS volume set da Non-FS data 6 FAT16 4d QNX4.x 87 NTFS volume set db CP/M / CTOS / . 7 HPFS/NTFS 4e QNX4.x 2nd part 88 Linux plaintext de Dell Utility 8 AIX 4f QNX4.x 3rd part 8e Linux LVM df BootIt 9 AIX bootable 50 OnTrack DM 93 Amoeba e1 DOS access a OS/2 Boot Manag 51 OnTrack DM6 Aux 94 Amoeba BBT e3 DOS R/O b W95 FAT32 52 CP/M 9f BSD/OS e4 SpeedStor c W95 FAT32 (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi eb BeOS fs e W95 FAT16 (LBA) 54 OnTrackDM6 a5 FreeBSD ee GPT f W95 Ext\’d (LBA) 55 EZ-Drive a6 OpenBSD ef EFI (FAT-12/16/ 10 OPUS 56 Golden Bow a7 NeXTSTEP f0 Linux/PA-RISC b 11 Hidden FAT12 5c Priam Edisk a8 Darwin UFS f1 SpeedStor 12 Compaq diagnost 61 SpeedStor a9 NetBSD f4 SpeedStor 14 Hidden FAT16 <3 63 GNU HURD or Sys ab Darwin boot f2 DOS secondary 16 Hidden FAT16 64 Novell Netware af HFS / HFS+ fb VMware VMFS 17 Hidden HPFS/NTF 65 Novell Netware b7 BSDI fs fc VMware VMKCORE 18 AST SmartSleep 70 DiskSecure Mult b8 BSDI swap fd Linux raid auto 1b Hidden W95 FAT3 75 PC/IX bb Boot Wizard hid fe LANstep 1c Hidden W95 FAT3 80 Old Minix be Solaris boot ff BBT 1e Hidden W95 FAT1 Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-2871, default 1): Using default value 1 Last cylinder, +cylinders or +size{K,M,G} (1-2871, default 2871): Using default value 2871 Command (m for help): p Disk /dev/xvdb: 23.6 GB, 23622320128 bytes 255 heads, 63 sectors/track, 2871 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x27cc1f5a Device Boot Start End Blocks Id System /dev/xvdb1 1 2871 23061276 83 Linux //不是lvm分区格式 Command (m for help): t //转换 Selected partition 1 Hex code (type L to list codes): 8e //换成8e Changed system type of partition 1 to 8e (Linux LVM) Command (m for help): p Disk /dev/xvdb: 23.6 GB, 23622320128 bytes 255 heads, 63 sectors/track, 2871 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x27cc1f5a Device Boot Start End Blocks Id System /dev/xvdb1 1 2871 23061276 8e Linux LVM //现在lvm分区格式了 Command (m for help): wq The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.

[root@iZ94zz3wqciZ ~]# pvcreate /dev/xvdb1 //创建物理卷 Physical volume \”/dev/xvdb1\” successfully created [root@iZ94zz3wqciZ ~]# vgcreate myfiles /dev/xvdb1 //创建逻辑卷组 Volume group \”myfiles\” successfully created [root@iZ94zz3wqciZ ~]# vgchange -ay myfiles //激活逻辑卷组 0 logical volume(s) in volume group \”myfiles\” now active [root@iZ94zz3wqciZ ~]# vgdisplay myfiles | grep \”Total PE\” //查看该卷组所有的PE Total PE 5629 [root@iZ94zz3wqciZ ~]# lvcreate -l 5629 -n fastdfs myfiles //创建逻辑卷 Logical volume \”fastdfs\” created.

[root@iZ94zz3wqciZ ~]# mkfs.ext4 /dev/myfiles/fastdfs //格式化逻辑卷 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 1441792 inodes, 5764096 blocks 288204 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 176 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 39 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.

[root@iZ94zz3wqciZ ~]# echo \’/dev/myfiles/fastdfs /mnt/fastdfs ext4 defaults 0 0\’ >> /etc/fstab //自动挂载 [root@iZ94zz3wqciZ ~]# mount -a //手动挂载 [root@iZ94zz3wqciZ ~]# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/xvda1 20641404 14778608 4814272 76% / tmpfs 509300 0 509300 0% /dev/shm /dev/mapper/myfiles-fastdfs 22694396 176064 21365516 1% /mnt/fastdfs //lvm逻辑卷已挂载 [root@iZ94zz3wqciZ ~]# reboot //操作完最好重启一下

[root@iZ94zz3wqciZ ~]# fdisk /dev/xvdc //详细过程同上，就不详细说明了 [root@iZ94zz3wqciZ ~]# reboot [root@iZ94zz3wqciZ ~]# pvcreate /dev/xvdc1 //创建物理卷 Physical volume \”/dev/xvdc1\” successfully created [root@iZ94zz3wqciZ ~]# vgextend myfiles /dev/xvdc1 //将新硬盘加入卷组 Volume group \”myfiles\” successfully extended [root@iZ94zz3wqciZ ~]# vgdisplay myfiles | grep \”Total PE\” //查看所有PE Total PE 6907 [root@iZ94zz3wqciZ ~]# lvresize -l 6907 /dev/myfiles/fastdfs //重新规定大小 Size of logical volume myfiles/fastdfs changed from 21.99 GiB (5629 extents) to 26.98 GiB (6907 extents). Logical volume fastdfs successfully resized [root@iZ94zz3wqciZ ~]# resize2fs /dev/myfiles/fastdfs //重新规定大小 resize2fs 1.41.12 (17-May-2010) Filesystem at /dev/myfiles/fastdfs is mounted on /mnt/fastdfs; on-line resizing required old desc_blocks = 2, new_desc_blocks = 2 Performing an on-line resize of /dev/myfiles/fastdfs to 7072768 (4k) blocks. The filesystem on /dev/myfiles/fastdfs is now 7072768 blocks long. [root@iZ94zz3wqciZ ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda1 20G 15G 4.6G 76% / tmpfs 498M 0 498M 0% /dev/shm /dev/mapper/myfiles-fastdfs 27G 172M 26G 1% /mnt/fastdfs //新的5G硬盘加上去了